![]() 1, Audioserver (the process is the same with the other Loxone devices) for which the card is gonna be created.įinally, after the selection, click on the " Format" button and confirm it with " Yes" on the next pop-up window. There is a button for you to delete the no longer needed backups from your PC as well.Īt the drop-down menu at the bottom, you can select the device type from Miniserver, Miniserver Gen. In the section saying " The following backups are available", you can select a backup to be restored to the SD card, but if you want to create an SD card with factory settings, do not select anything there. Please use the drop-down menu in order to filter any listed backups for specific drives. Proceed to open the Loxone Config software, the Miniserver's SD Card from the Periphery Tree, and click on " Format SD Card".Ī new window will pop up, where on the side you need to select the drive containing the SD card. As an alternative, you can use a new SD card which you can prepare on the side while your Miniserver is still functioning with the old card, thus minimizing your downtime. Turn off the power supply to the Loxone Miniserver, remove the SD card and insert it directly into your PC's card reader. If the Miniserver shows SD card errors, it is recommended for you to replace the card as soon as possible. Make sure to use only Loxone SD cards, due to their extensive industrial testing, guaranteeing error-free functionality and operation. The important basics for the reset are the following: The SD card can be formatted on a PC, using Loxone Config software. ![]() It is possible to restore a previously stored backup if you have it performed or rest the password you are using. The Factory default reset for the Loxone Miniserver is performed by formatting the removable microSD card containing the Miniserver's operating system, settings, and programming.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |